Browband help?
 
 

       The Horse Forum > Horse Tack > Horse Tack and Equipment

Browband help?

This is a discussion on Browband help? within the Horse Tack and Equipment forums, part of the Horse Tack category
  • Can you change the browband on any bridle
  • Changing browband on bridle

 
LinkBack Thread Tools
    08-19-2011, 08:41 PM
  #1
Foal
Browband help?

How do you remove a browband from a bridle? Cause I'm feeling pretty dumb here... I just want to remove it so I can make a ribbon browband, and I think it's easier if it's not on the bridle, right?
     
Sponsored Links
Advertisement
 
    08-19-2011, 08:49 PM
  #2
Yearling
Depends on the bridle, mine is you just unbuckle the bit part and slide it down and off..it's a western bridle.
Posted via Mobile Device
     
    08-20-2011, 03:19 PM
  #3
Weanling
Western bridle: Undo the bit pieces, and slide it right off.

English- Remove the bit pieces, unbuckle the caveson, slide it out from the browband, and then slide the browband off the crown piece.

It seems difficult at first, but it's really not bad at all, once you learn all the pieces of the bridle.

I was in Pony Club, so I was made to take apart and put back together a bridle for a rating. Definitely learned a ton about all the tack parts in PC.
     
    08-22-2011, 11:41 AM
  #4
Green Broke
Quote:
Originally Posted by DejaVu    
English- Remove the bit pieces, unbuckle the caveson, slide it out from the browband, and then slide the browband off the crown piece.

It seems difficult at first, but it's really not bad at all, once you learn all the pieces of the bridle.
I learned how the pieces fit together the hard way- I ordered my own bridle when I was leasing a horse because he didn't have his own I was tired of having to adjust every time I rode. Well, the bridle I ordered came disassembled (I assume this is standard; I haven't purchased another bridle since) so I spent an embarrassingly long amount of time studying bridle pictures on the internet and finally got it put together right
     
    08-22-2011, 11:45 AM
  #5
Banned
Hmmm, any bridle I have purchased has been assembled.


Getting the brow band back on (or on in the first place) can be a challenge the first time you do it. Make sure you pay good attention as you take it off.
     
    08-23-2011, 05:15 PM
  #6
Weanling
Quote:
Originally Posted by verona1016    
I learned how the pieces fit together the hard way- I ordered my own bridle when I was leasing a horse because he didn't have his own I was tired of having to adjust every time I rode. Well, the bridle I ordered came disassembled (I assume this is standard; I haven't purchased another bridle since) so I spent an embarrassingly long amount of time studying bridle pictures on the internet and finally got it put together right

My bridles have all come dissassembled as well. I ordered my current bridles from Dover.... Less shipping cost when it's all apart, since you don't need a bigger package to fit it assembled. Atleast that's the theory I've come up with.
     

Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
What do you think of one of our new browband idea ikle pickle Horse Tack and Equipment 8 04-05-2010 03:31 PM
Browband help Marrissa Horse Tack and Equipment 3 03-18-2010 04:12 PM
browband help cathrynxox Horse Tack and Equipment 3 11-22-2009 05:16 PM
Nelson's New Browband MIEventer Horse Tack and Equipment 19 06-06-2009 06:35 PM
Browband futolympeventer327 Horse Training 4 11-23-2008 10:33 PM



All times are GMT -4. The time now is 12:58 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0