Sharon Camarillo 702 Bit Set Up
   

       The Horse Forum > Horse Tack > Horse Tack and Equipment

Sharon Camarillo 702 Bit Set Up

This is a discussion on Sharon Camarillo 702 Bit Set Up within the Horse Tack and Equipment forums, part of the Horse Tack category
  • How to connect a sweet six bit to a bridle
  • What chin strap do you use on a gag bit?

 
LinkBack Thread Tools
    05-24-2012, 09:37 AM
  #1
Weanling
Sharon Camarillo 702 Bit Set Up

I just bought this bit, after a lot of discussion with a lot of different barrel people, but I want to make sure I put it together correctly. So if someone could explain where the reins [I'm guessing the O ring], headstall [I'm guessing the rectangle piece], and the rope nose piece [pictured below, I'm guessing also goes where the headstall goes?]. Also do you need a chin strap on this bit, if so where would I hook it?





Thanks in advance to anyone that can help!
     
Sponsored Links
Advertisement
 
    05-24-2012, 10:03 AM
  #2
Weanling
Bump, anyone?
     
    05-24-2012, 04:01 PM
  #3
Weanling
Really, no one can help me? I really don't want to put it together wrong!
     
    05-24-2012, 04:10 PM
  #4
Green Broke
You put the reins on the small circle/loop and you put the nose band across their nose and you attach it to the the bit where the rectangle loops are. You can use a chin strap or without.

It's a sliding gag bit that acts like a snaffle but adds leverage. Hope I helped.
     
    05-24-2012, 04:16 PM
  #5
Weanling
Quote:
Originally Posted by Gidget    
You put the reins on the small circle/loop and you put the nose band across their nose and you attach it to the the bit where the rectangle loops are. You can use a chin strap or without.

It's a sliding gag bit that acts like a snaffle but adds leverage. Hope I helped.
Thanks, you did. I just wanted to make sure I was putting it together right. And the headstall hooks in the same place as the nose piece, correct?
     
    05-24-2012, 04:28 PM
  #6
Green Broke
I am thinking so. Is your bridle thick though because I am not sure ...let me look something up....How do you like your bit? I am wanting to get a SC 6 bit.
     
    05-24-2012, 04:34 PM
  #7
Green Broke
Did you buy the nose band seperate? I seen some that have tiny little loops where you connect the noseband but yours doesn't have it so just curious. The way I described what to do I am pretty sure is the correct way. There would be no other way it seems.
     
    05-24-2012, 04:35 PM
  #8
Weanling
Quote:
Originally Posted by Gidget    
I am thinking so. Is your bridle thick though because I am not sure ...let me look something up....How do you like your bit? I am wanting to get a SC 6 bit.
It's kind of thick, but would fit in the rectangle part. I used someone else's bit on the horse and he completely changed. He really liked it and listened extremely well to it, and probably shaved a few seconds off his run.
     
    05-24-2012, 04:36 PM
  #9
Green Broke
Why don't you just try it and see if it works. Did they have the noseband?
     
    05-24-2012, 04:37 PM
  #10
Weanling
Quote:
Originally Posted by Gidget    
did you buy the nose band seperate? I seen some that have tiny little loops where you connect the noseband but yours doesn't have it so just curious. The way I described what to do I am pretty sure is the correct way. There would be no other way it seems.

I did buy it separately, but was told that the bit works better if you have the nose piece.
     

Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Anybody here about the abuse case conserning Sharon Jeffco on judge judy?**PICTURES** Baylen Jaxs Horse Talk 107 07-19-2012 07:08 PM
Sharon Jeffco's side of the story...THE TRUTH mftowner06 Horse Talk 64 02-10-2012 11:43 PM
Sharon Camarillo Sweet Six Bit SorrelHorse Horse Tack and Equipment 3 09-24-2011 11:11 PM
Sharon Saare Endurance Saddle cheriemoldenhauer Tack and Equipment Classifieds 11 09-14-2011 09:11 AM
15" Sharon Saare endurance saddle horseluver250 Tack and Equipment Classifieds 6 07-24-2011 01:37 PM



All times are GMT -4. The time now is 07:24 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0