So, I've made this tutorial for those who'd like to learn how I made my Sponge Bob polo wraps.
What you need:
-marker or something to mark with
-a good pair of scissors.
-fleece (any pattern/colour)
*Horse wraps: 4" by 8f
*Pony wraps: 4" by 6f
With your fleece laid out nicely, measure 4" for the width, and 8f or 6f for the length.
Mark it at 4".
I did lots of dots marking 4" and then I used a wooden board to make a straight line. Mark that.
Cut along the marked line. Simple. :]
When you are done cutting, take one end that will be your fasten end. Fold the corners in, but not too close.
Sew it in place. I didn't do this as my sewing basket has been misplaced. This is a must.
Now cut your velcro to a certain length. Mine are 3 1/2"
Place your sticky velcro onto the folded corners piece. Sew in place. Again, I did not do this.
Place the soft velcro piece about 8" on the flipside. Sew in place.
*Note: Another idea, is to extend the sticky velcro out.
And there you have it! Polo wraps in a snap! And it cost me all but $6 CDN!
Hope you enjoyed this!