The Horse Forum

The Horse Forum (/)
-   Horse Tack and Equipment (http://www.horseforum.com/horse-tack-equipment/)
-   -   Equipment questions! Adding D rings to old saddle, etc (http://www.horseforum.com/horse-tack-equipment/equipment-questions-adding-d-rings-old-186082/)

JavaLover 05-01-2013 11:16 PM

Equipment questions! Adding D rings to old saddle, etc
 
Hi everyone! I recently bought a renovated, cheap, old saddle. It's functional, which is all I can afford right now lol. Anyways, I was wondering if there is a way to attach D rings to this saddle for a breast collar?

http://i1299.photobucket.com/albums/...psd7b76843.jpg

http://i1299.photobucket.com/albums/...ps562ebee9.jpg

http://i1299.photobucket.com/albums/...ps85ea3eb9.jpg

I was also wondering how to attach a nylon rear cinch - one that doesn't have buckles. It looks something like this

http://i1299.photobucket.com/albums/...psf1f9c466.jpg
Posted via Mobile Device

ReneeM 05-02-2013 03:23 AM

Do you have a photo of the back of the saddle where the back cinch would go?
For the breastplate you'd either have to remove the skirts and cut a slit to put the hardware in then rivet it in place or you could just attach your breastplate to the front rigging.

Phly 05-02-2013 03:42 AM

Yeah, just attach your breast collar to the front rigging. It's not ideal but works just fine.

The bucking strap should attach to the rear rigging rings. I'm on my phone so really can't see how the strap you pictured would attach to rings... Most are passed through the ring and tied.
Posted via Mobile Device

JavaLover 05-02-2013 10:23 AM

Those pictures are just of the front. I will get a picture of the back later
Posted via Mobile Device

DieselPony 05-02-2013 10:52 AM

I had D rings put on my last saddle, just took it in to a lady who did leather work. Cost me parts and 20$ for her time.
The only catch was there was no room to attach them properly so she warned against heavy use. It was used for trail riding, and was still holding up fine when I had to get a new saddle after several years use (horse outgrew the saddle).

JavaLover 05-02-2013 06:56 PM

Here are the rear riggings. I just don't understand how this will attach

http://i1299.photobucket.com/albums/...psb6e26d67.jpg

http://i1299.photobucket.com/albums/...ps8fb10760.jpg
Posted via Mobile Device

Phly 05-02-2013 08:14 PM

The back billets are already there. Just add the strap and you're good to go. The strap has the buckles on it. I'd personally get a leather strap, it'll look nicer with that saddle. And make sure to hobble the bucking strap.

Looks like a decent enough saddle. What's the story on it?
Posted via Mobile Device

DieselPony 05-02-2013 08:17 PM

The nylon back cinch you posted also has the billets with it, so the leather piece hanging on your saddle will be replaced.
After undoing the buckles, you just feed the end through the ring on the saddle and back through the loop on the back cinch. Those pieces will stay on the saddle like the leathers billets that are already on your saddle.

Edit: And Phly beat me to saying the billets are already there. And I agree with the getting the leather cinch. Not for aesthetics, but the nylon one I had rubbed the horse really bad.

Saddlebag 05-02-2013 08:33 PM

Attach the breast collar to the cinch rings as they are much stronger than the Ds.

JavaLover 05-02-2013 10:48 PM

I got a leather cinch with the saddle.. But it doesn't have the strap that connects it to the front cinch. Any ideas there?

And this saddle is very old - grandparents said that its from the 1960s. They had some repairs done to it, which includes the white buckstiching and the skirt.
Posted via Mobile Device


All times are GMT -4. The time now is 05:02 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0