The Horse Forum

The Horse Forum (/)
-   Horse Riding Critique (http://www.horseforum.com/horse-riding-critique/)
-   -   Bending? (http://www.horseforum.com/horse-riding-critique/bending-52139/)

stormyweather101 04-08-2010 09:12 PM

Bending?
 
Okay, so I ride a very sensitive mare, and she is an excellent little pony, but as on other horses too, I have trouble bending them with my inside rein because I have a feeling that they will cut to the inside. I do try to apply inside leg to keep her on the rail, but I think I am missing a piece of information to the trick of this because she either speeds up, or doesnt listen. I know its possible even though she is a little fresh, but I need some help on this one. Any other tips for just riding in general is welcome here too(: I can take all the advice I can get(:

MyBoyPuck 04-08-2010 10:23 PM

Are you trying to bend the whole body, or ask for flexion at the pole? You can ask for flexion with the inside rein, but it's not a great tool for bending. I'm thinking maybe start with the simpler concept (for her) of flexion at the poll which will start the process of bending around your inside leg. Here's a few exercises to start with.

1. At the halt, with sufficient rein contact, just enough to feel both sides of her mouth, pick an "inside" and rotate you inside rein so that your knuckles turn upward. This is what's called an indirect rein. While rotating the rein, ever so slightly bump her with the leg on the same side. She should respond by flexing her poll just enough to where you can see her inside eyelashes and nostril. Do this on both sides for about 10 times or until you know she understands what you are looking for.

2. Same exercise at the walk. If you need something to keep her interested, weave through some cones or barrels. Just get enough flexion to see those eyelashes, straighten both reins for a step and head back to the other "inside".

3. Ride corners. Use ground poles to make corners if you don't have a confined ring. Walk straight into the corner, a step before the turn, inside rein and bump or press with inside leg to get the flexion for a balanced turn.

Once she's doing all those well, move onto circles that will engage the rest of her body. You'll have to add two additional aids to get the bend. Your outside rein will control her outside shoulder and keep her from coming off the circle. Your outside leg will slide slightly behind the girth to keep her hindquarters from swinging out. Between your outside leg and inside rein creating flexion, your horse should look like a bow, with a nice gentle curve to her. If all the pieces are in place, she will feel soft and supple.

All this is dressage stuff by the way, so if you have access to a dressage instructor, I'm sure it will help her a lot.

That's all I have for now. Hopefully others will ring in with suggestions.

Sphi 04-09-2010 01:44 PM

Just a quick tip, I find that twitching or shaking the inside rein works better than tugging when you're asking for a bend. :)

stormyweather101 04-09-2010 03:21 PM

Thanks guys! And yeahh. my trainer was on the olypic team and specializes in dressage so I'll make sure to mention this to her!

CJ82Sky 04-09-2010 04:02 PM

i always tell my students inside leg to outside rein for bending. when you bend using the inside rein as the primary means of communication, the horse tends to collapse to the inside. however when you use inside leg into outside rein and the inside rein is slightly open and giving, the result is a more proper bend. in the second example it's the leg that is queuing the bend rather than the reins, so the bend is soft and supple through the horse's body since it is originating with the ribcage. in essence you are moving the ribcage over to the outside, and the outside rein maintains flexion at the poll and prevents the shoulder from bowing out, and the inside rein suggests the bend in the horse's neck follow the bend of the horse's ribcage which originated with the leg aid.


All times are GMT -4. The time now is 12:21 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0