The Horse Forum banner

Status
Not open for further replies.
1 - 13 of 13 Posts

·
Registered
Joined
·
3,199 Posts
Discussion Starter #1
This is more out of curiosity than anything since I am pretty happy with how my guy goes in an o-ring snaffle.

What is the difference between an egg-butt, d-ring, full check, etc snaffle bits?
 

·
Registered
Joined
·
8,220 Posts
The Egg Butt and D ring were designed after the Loose Ring, without the Loose Ring Effect.

The Full Cheek was designed to not slip through the horses mouth, but should ALWAYS be used with the Cheek Pieces. This bit was designed to sit a certain way in the horses mouth at a particular angle, and can only be done when the Cheek Pieces are in use. When this bit is used without the cheek pieces, it is now sitting incorrectly in the horses mouth.

I ride in Egg Butt Cheek Pieces and D Ring Cheek Pieces.
 

·
Registered
Joined
·
8,220 Posts
The Loose Ring does exactly as the name states. The Rings where the reins are attached and the Rings being attached to the mouthpiece - aren't stuck in place.

So the rings slide through the ends of the mouthpiece.

This Loose Ring Effect - does not allow a horse to lean onto the bit, because the rings will slide, and also does not allow a handsy rider to take the horses mouth, because again - the rings slide.

Hence, loose ring.

Meh, I am not that great at explaining things.
 

·
Registered
Joined
·
3,199 Posts
Discussion Starter #5
You did better than me! One of the girls at the barn asked me and I just had to turn to her and tell her I have no clue!

I knew about the loose rings, I discovered a love for them when I got my TB who use to try and grab the bit but couldnt do that with the loose ring bits. I also like them for beginner riders as I find that they aren't as harsh on the horses mouth when the riders hands are all over the place.

So is the only difference between an egg butt and a d-ring the shape of the rings? Wonder why they have both types then.
 

·
Registered
Joined
·
23,909 Posts
Somewhat different design.

D-ring is bigger and put more pressure on sides if you try to turn a horse. From what I read and which is logical. :) Eggbutt is more smooth where the mouth piece connected to the ring. I personally prefers it just because of that.
 

·
Registered
Joined
·
432 Posts
I much prefer loose rings over anything else. I heard that when you put pressure on the bit the rings have to move so its somehow less severe (?) I only heard that so correct me if I'm wrong.
 

·
Registered
Joined
·
6,179 Posts
A D-ring has straight sides - So it puts more lateral pressure on the side of the face when turning - So that you are pulling the head over from one side and pushing it over from the other (Very exxagerated example, lol). It's really good as a first bit as it really helps clarify the turning aid.

A loose ring allows for some play in the bit, as well as preventing either the horse or rider just 'grabbing' the bit.

An eggbut has no play, and no assisting lateral pressure. The only time I really have a use for an eggbut is when one of my horses gets pinched in a loose ring and needs a double jointed mouthpiece - You can't get a D-ring side with a double jointed mouthpiece here. If you could, I would never use an eggbut. The others are better, in my opinion.
 

·
Registered
Joined
·
286 Posts
Hunters go in D-rings. It's all about the style. That's the popular look right now, and has been for a while, I think.

I see a lot of jumpers and dressage horses in loose rings.

Full-cheeks really help steering, especially with young horses.

Not really sure about egg-butts.
 

·
Registered
Joined
·
3,199 Posts
Discussion Starter #10
I much prefer loose rings over anything else. I heard that when you put pressure on the bit the rings have to move so its somehow less severe (?) I only heard that so correct me if I'm wrong.

That's what I had heard too, that the movement of the rings somehow softens the severity of the mouthpiece or the cue. I just like them because it is harder for the horse to grab on to the bit and brace.
 

·
Registered
Joined
·
23,909 Posts
I much prefer loose rings over anything else. I heard that when you put pressure on the bit the rings have to move so its somehow less severe (?) I only heard that so correct me if I'm wrong.
From everything I read eggbutt and D-ring are more gentle then loose ring. :) One of the possible problems with the loose ring is it can pinch, but I've heard different opinions on that.

The problem I run into my qh hates when the ring start to move. She likes everything to be stable. On other side my paint preferred loose ring to the eggbutt. Bit is something you never know what will be the best for the horse. :wink:
 

·
Registered
Joined
·
651 Posts
Interestingly, my TB gelding go really hard-mouthed when I put him in a loose-ring, he started leaning on it and running through the bit, and it was a Myler too! Put him in an oval-link eggbutt and he was so much better, improved almost straight away. Go figure! :?
 
1 - 13 of 13 Posts
Status
Not open for further replies.
Top