The Horse Forum banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
65 Posts
Discussion Starter · #1 ·
Hi,

I'm interested in what everyone is using for a handle/latch for a stall door that leads out to a run-in? The latch needs to be able to open from both inside the stall and outside from the run-in (handles both sides).

I've found a Stanley SP490 at Lowes but it's for doors up to 2" thick. I plan on building my doors with a 2X 6 flat wood frame and covering it with 3/4" thick plywood (or oak boards). So my door thickness will be a minimum 2 1/4".

Any do-it-yourselfer's out there with a suggestion or two??

Thanks,
Dave
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top