The Horse Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
573 Posts
Discussion Starter · #1 ·
So, I've made this tutorial for those who'd like to learn how I made my Sponge Bob polo wraps.
Let's begin.


What you need:
-measuring tape
-velcro
-marker or something to mark with
-a good pair of scissors.
-fleece (any pattern/colour)
*Horse wraps: 4" by 8f
*Pony wraps: 4" by 6f


With your fleece laid out nicely, measure 4" for the width, and 8f or 6f for the length.
Mark it at 4".


I did lots of dots marking 4" and then I used a wooden board to make a straight line. Mark that.


Cut along the marked line. Simple. :]


When you are done cutting, take one end that will be your fasten end. Fold the corners in, but not too close.
Sew it in place. I didn't do this as my sewing basket has been misplaced. This is a must.


Now cut your velcro to a certain length. Mine are 3 1/2"


Place your sticky velcro onto the folded corners piece. Sew in place. Again, I did not do this.
Place the soft velcro piece about 8" on the flipside. Sew in place.
*Note: Another idea, is to extend the sticky velcro out.


And there you have it! Polo wraps in a snap! And it cost me all but $6 CDN!

Hope you enjoyed this!
 

·
Registered
Joined
·
1,679 Posts
Excellent tutorial! I'll definitely be trying to make my own long before I go spend $25 US or more on polos! :D
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top